hey guys new here my blasters clutch is gone i think thats why im posting here to get a second opinion. heres the deal i start it up fine squeeze the clutch put it in gear let the clutch out and nothing happens? i took the clutch cover off and lookd at the plates they seem to look ok but then again what exactly am i loooking for if they are worn? could it just need to be adjusted and if so how do i do this? thanks
blaster clutch need relpacing?
- Thread starter slidesquad240
- Start date
thats what i thought too at first it was engaging but would barely move and eventally after trying to move it wouldnt do anything? im starting to think its the top end bt it fires up first kick?
oi just adjusted the clutch lever still a little firm but it is now engaging just not to its full potential feels like it has no balls? adjust more?
adjusted it and doent want to move just revs when i pt it in gear and release the clutch lever. gonna order a clutch kit
I think i need a new clutch cause if i pull it in just slightly it starts slipping, and the basket has slop in the ring gear
Soon i'll have money to put in her. It dont slip while takeing off and what not unless i drag down the road, then it seems to slip a little but not much.
Soon i'll have money to put in her. It dont slip while takeing off and what not unless i drag down the road, then it seems to slip a little but not much.money is not the problem haha i just ordered a tusk clutch so ill post back my results when its installed
just order new oem fibers! springs, and plates usually dont show ware unless the motor got extremely hot and warped, noting is better than oem when comming to a clutch
i have the tusk heavy duty cluthc and i am happy with it. the lever is a tiny bit harder to pull than the stock clutch, but no big deal. the only thing is... mine soaked up alot of gear oil. i dont know why, but it soaked up like half a quart.
oh ok i see what your saying...this thing will be here monday so hopefully i get it installed then cannot wwait.
