2005 Blaster its completely stock. All of the sudden it just started bogging at wot, Did everything cleaned the carb, fuel tank, checked everything i could think of. but i dont know what wrong. 3/4 throttle and little bit more and it doesnt do it soon as you hit full it starts bogging
Bike just wont rev out
- Thread starter jefferz
- Start date
You cant rell someone a main jet size to run in thier bike. That is something they have to do themselves, there are too many factors in determining jetting and someone else telling you what to run isnt going to work. And The needle clip doesnt affect jetting in the 3/4 to open range, which is where he is having problems. Since it has gotten cloder recently i would assume that it is running lean. I would suggest going up a size first, just to be safe, and see if it gets better. If it gets worse go down a size untill it gets better. And make sure you have a clean air filter when you test it
well if it was the tors it would revpast like 3000 rpms or somewhere around there. it seems to b deff a jet problem
