bigger carb intake boot and carb boot

[bag0b0nez]

hey guys i finally got some money to where i can start getting my quad back together. and getting my cylinder back. well i need to make my quad ready for the bigger carb and i want to know how to do the homemade conversion for the back air box part. where the plastics are u know. for a 33mm pwk like pics and what sizes i should get or how to get the sizes to do it. i couldnt find my old post that i asked this about sorry for taking up space.

 

[98gtp98]

its super easy you need 5 inches of 2in pvc and a 2in rubber pvc coupler and there you go o and 3X 2.5in radiator clamps I:I

 

[yb200]

didnt u just make a post about getting rid of your blaster

 

[bag0b0nez]

didnt u just make a post about getting rid of your blaster

yea in 4 months lol!!!

 

[Charles14]

u can buy or make something like this, just use pvc or hose that come outs and fits the carb... and a good metal pipe to fit the filter on the inside part...


for the intake its easily to buy an adaptor to get it good spoted...


good luck and hope it helps u a bit

 

[fioz600r]

u can buy or make something like this, just use pvc or hose that come outs and fits the carb... and a good metal pipe to fit the filter on the inside part...


for the intake its easily to buy an adaptor to get it good spoted...


good luck and hope it helps u a bit

What air box is that or did you make that?

Very nice by the way!!!!!!!!!!!!!!!!

 

[jfblasterboy65]

thats the project blaster air box i have one but mines not holographic