HERES THE DEAL....
i pulled the cylinder of my bike last night for some modifications....
the wossner piston has a small crack in it.engine still ran strong before tear down. so i have decided to part the whole bike out. all u will need is a new piston and hone and u will be up and running.
what u get...
vitos oil block off
vitos allen head case bolts
flywheel
clutch
polished case
vitos +3
vforce 3
34 mm carb with throttle cable
bb vitos
all new seals
all new bearings
rickystator adjustable timing plate( no lighting coil)
what u will need to run this engine...new piston and hone and pipe.i have a dyno port pipe i will throw in but it has been modded to fit a suzuki frame. the top mount will have to be reworked. carb is jetted and bike ran excellent before tear down
i am asking 650 plus freight.
any questions let me know. thanks
i will have some pictures up here in a few hours.
i pulled the cylinder of my bike last night for some modifications....
the wossner piston has a small crack in it.engine still ran strong before tear down. so i have decided to part the whole bike out. all u will need is a new piston and hone and u will be up and running.
what u get...
vitos oil block off
vitos allen head case bolts
flywheel
clutch
polished case
vitos +3
vforce 3
34 mm carb with throttle cable
bb vitos
all new seals
all new bearings
rickystator adjustable timing plate( no lighting coil)
what u will need to run this engine...new piston and hone and pipe.i have a dyno port pipe i will throw in but it has been modded to fit a suzuki frame. the top mount will have to be reworked. carb is jetted and bike ran excellent before tear down
i am asking 650 plus freight.
any questions let me know. thanks
i will have some pictures up here in a few hours.
Last edited:
