hey guys a guy wants my 99 trx300ex and he offered to trade me his 01 shee it has dommed heads sitting at 165 idk if this is true or not whats the max u can bore the cyl over he says he did 40 over other then that i am going to bring a compression tester any advice on the shee
banshee maybe opinion plz guys
- Thread starter ihcguy
- Start date
a shee for a 300x...thats a no brainer, do eeeeetttt !
i think shee cylinders have the same bores as blaster ?
if so you're good to 80/90 over.
expect to find little things like bearings/bushings needing replaced on any used machine that old.
i think shee cylinders have the same bores as blaster ?
if so you're good to 80/90 over.
expect to find little things like bearings/bushings needing replaced on any used machine that old.
I know you can get 90, seems I've heard of 100 over tho not recomende, sleeve to thin? Think it would be more on what you wanted to do with it. Myself I'd probably go fo it on a trail machine. yip : Yamaha Banshee Wiseco 100 66 50 mm Piston Kit YFZ350 | eBay
Last edited by a moderator:
cause it probably isn't even worth that?? On it's last leg?FYI a reasonable rebuild on a Banshee is $850 give or take. Weisco parts, Crank, piston, bore, etc.
gf bike i think he has a yzf450 all done up 480 with a stroker this is his gfs now too much power still it seay to rebuild these i know
just wanted ti make sure those cyl still had life left in them
just wanted ti make sure those cyl still had life left in them
