Is there a way to make the Blaster in to an automatic, The fiance wants a blaster or somthing similar but all i find is blasters for cheap and everything else is 1500 or more.
Automatic?????
- Thread starter ZeroTolerance
- Start date
no there is not,
but with an e-z pull clutch lever, to make the pull 30% easier, anyone can learn a clutch in a good day of riding
Outlaw EZ Pull 3 Position Clutch Lever Suzuki RMZ250 RMZ450 RMX250 | eBay
but with an e-z pull clutch lever, to make the pull 30% easier, anyone can learn a clutch in a good day of riding
Outlaw EZ Pull 3 Position Clutch Lever Suzuki RMZ250 RMZ450 RMX250 | eBay
Last edited by a moderator:
the blaster was made as an entry level quad for teenagers and rookie adults, anyone can learn that clutch, it even has a special wave washer and 1/2 friction plate in the clutch pack to give it cushion and make it easier to work/learn
simplest way i teach peeps to work a clutch is to give it a little throttle, start letting the clucth out slowly, when the quad starts moving, hold the clutch in that position for about 5-10 feet till it gets roilling, then let it out the rest of the way,
the most frustrating thing is letting it out completely too early and keep stalling it, or end up on your azz
thats how i learned it helps so much to let it creep, that and learning stops and starts do a lot for confidence.
haha, i learned by putting it on dirt and letting her have the gas, and dropping it I:I
(not responsible if you crash it trying that way)
(not responsible if you crash it trying that way)
simplest way i teach peeps to work a clutch is to give it a little throttle, start letting the clucth out slowly, when the quad starts moving, hold the clutch in that position for about 5-10 feet till it gets roilling, then let it out the rest of the way,
the most frustrating thing is letting it out completely too early and keep stalling it, or end up on your azz
My cousin did that once, but he had it rev'd so high he just took off! Did a burnout on our cement pad in front of shed...
