August 2014 RIDE-OTM Entries

Status
Not open for further replies.

Awk08

Administrator
Staff member
Technician
Jan 30, 2009
24,427
2,290
175
ATV/Bike of the month.
ANY ATV's or BIKE's may enter
RUN WHAT YA BRUNG :)


for anyone entering a bike, feel free to switch details...... a-arms to forks ect.
or whatever else fits your ride in the entry form, just keep the details in the category they belong


Entries for Ride Of The Month (August 2014) are now open!

Please make sure you have read the following thread before creating your entry.

Ride Of The Month Entry Details, Rules and Requirements...

Entries should be posted below by copy and pasting the
completed modification form, filled in with your details
and pictures

The modification form can be found here...
http://www.blasterforum.com/entries...ils-rules-requirements-3275/#post31106st31106

Only entrants for this months contest should post thier entries in here !

Have a great time and GOOD LUCK!​
 
Year | Make | Model :

1.2005
2.Yamaha
3.Blaster



Chassis | Suspension | Controls:
A Arms: ASR +3+1 Pro-X Standard Travel
swingarm:Swingarm Shop HD +3
Steering Stem: Stock
Stabilizer:None
Axle :Banshee
Carrier:Stock With All Balls Bearings and Seals
Locknut:Stock Need to Change them!
Hubs F|R:Front 4/156 REAR 4/100
Bars:Tusk T-10 Aluminum 7/8" Handlebar ATV Sport Bend
Throttle/Clutch Lever: Blue MSR Clutch& Brake Levers
Grips: Blue Spider’s
Nerfs: Black on Black Tusks
Bumper: AC Racing Dirt screen
Grab Bar: AC Racing
Front Shocks: Works Dual Rate
Rear Shock: 400ex w/KOR Bushings
Brake Lines: Speedlines +2 front, +4 rear
Rotors F|R:Stock
Rims F|R:Douglass Blue Labels, Front and Rear
Tires F|R: Front 21x7x10 Sedona Bazooka Rear 20x11x8 Sedona Bazooka

Body:
Frame: Stock
Plastic: Team Yamaha Blue
Graphics|Seat Cover:FMF Factory Graphics/ Black Yamaha Seat Cover
Number Backgrounds: Nope
Handguards: BlueTusk MX Shield
Bar Pad: Tusk
Fuel Tank:Stock

Engine|Drive System:
Cylinder|Head: KOR Ported/ KOR Head Mod
Bore & Stroke:67.0MM X 57.0MM
Displacement: 201CC
Cam:??? Crank is a OEM rebuild by KOR
Carburetor: 26mm Mikuni, 32.5 Pilot, 340 Main
Air Filter|Box: Uni Filter with lid removed
Pipe|Silencer: Factory 7 Phantom
Clutch|Plates: Tusk HD
Gearing F|R: 13/39
CDI|Killswitch: Stock
Cooling: Air!
Custom mods:
Wiseco Prolite piston, Oil Injection block off, Parking Brake Removed, TORS Disabled, Nology Profire Hotwire and Coil, YFZ 450 Heel guards, 30mm Bar Risers, Polished Clutch Cover Circle, Diamond Plate Oil Pump Cover, False Key Switch, Stainless Allen Head bolts- cases and covers, ASR Pro-X Tie Rods and ends, Blue Transparent Fuel Line, Blue Valve Stem Caps, ASR Parking Brake Block off Plate, ASR Brake line Clamps, Armadillo Skid Plate, Blue Tank Vent Cap, WPS Gold Non O-ring Chain, Many Random Stickers my 6 year old has put on, and Lots of Blood, Sweat, and Tears!
1.jpg
3.jpg
2.jpg
4.jpg
 
Year | Make | Model :

1.2001
2.Yamaha
3.Blaster



Chassis | Suspension | Controls:
A Arms: stock
swingarm: +3 extended stock
Steering Stem: +1.5 extended stock
Stabilizer:None
Axle :stock with 1in wheel spacers
Carrier:Stock
Locknut:Stock
Hubs F|R:stock
Bars:stock
Throttle/Clutch Lever: stock
Grips: pro taper diamonds
Nerfs: alba pro elites
Bumper: DG
Grab Bar: stock
Front Shocks: banshees
Rear Shock: trx450r
Brake Lines: rear +6
Brakes F|R: Front stock, rear banshee hydo setup
Rims F|R Front stock, rear itp steel
Tires F|R: Front 21x7x10 stockers, Rear 20x11x8 kenda klaw xc

Body:
Frame: Stock
Plastic: Team Yamaha Blue
Graphics|Seat Cover: Yamaha seat cover
Number Backgrounds: None
Handguards: none
Bar Pad: MSR
Fuel Tank:Stock

Engine|Drive System:
Cylinder|Head: aggressive home port job/ my rechambered head
Bore & Stroke:67.50MM X 57.0MM
Displacement: 200 something
Cam:???
Carburetor: stock 26mm mikuni bored to 27.25mm. 32.5 pilot, needle 4th, 330 main
Air Filter|Box: Uni Filter with lid removed
Pipe|Silencer: trinity pipe with fmf powercore 2
Clutch|Plates: Tusk HD
Gearing F|R: 13/40
CDI|Killswitch: Stock
Cooling: Air
Other: lightened flywheel, oil injection block off, tors delete, front wheels flipped
Screenshot_2014-08-07-17-18-31.png

Screenshot_2014-08-07-17-18-49.png
Screenshot_2014-08-07-17-18-40.png
Screenshot_2014-08-07-17-18-59.png
 
trey trey.jpg
chris.jpg
Year | Make | Model : 1.
2.yamaha
3.blaster



Chassis | Suspension | Controls:
  1. A Arms:+2
  2. swingarm:stock
  3. Steering Stem:stock
  4. Stabilizer:none
  5. Axle : 1 1/4 kart axle
  6. Carrier: stock
  7. Locknut: none
  8. Hubs F|R: f, stock, r, kart hubs
  9. Bars: fly
  10. Throttle/Clutch Lever: throttle is from a Honda quad, lever is cr85
  11. Grips: AME grips
  12. Nerfs: alba
  13. Bumper:
  14. Grab Bar: None
  15. Front Shocks: 300ex
  16. Rear Shock: banshee
  17. Brake Lines:
  18. Rotors F|R:
  19. Rims F|R:
  20. Tires F|R:

Body:
  1. Frame: painted green
  2. Plastic: painted black
  3. Graphics|Seat Cover: custom gripper seat cover
  4. Number Backgrounds: made by my son
  5. Handguards:none
  6. Bar Pad:fly
  7. Fuel Tank: stock

Engine|Drive System:
  1. Cylinder|Head: ported
  2. Bore & Stroke:stock
  3. Displacement: 85cc
  4. Cam: none
  5. Carburetor: stock
  6. Air Filter|Box: uni filter, no box
  7. Pipe|Silencer: fmf fatty
  8. Clutch|Plates: tusk
  9. Gearing F|R: 15/30
  10. CDI|Killswitch: stock with deadman teather
  11. Cooling: liquid
Custom mods:...........
-2 swing arm
home made sway bar
gxsr rear brake
raptor heel guards
shaved down seat
custom rear sprocket hub that accepts a regular mini quad sprocket
 

Attachments

  • trey trey.jpg
    trey trey.jpg
    29.6 KB · Views: 1,656
  • chris.jpg
    chris.jpg
    104.8 KB · Views: 3,875
  • chris2.jpg
    chris2.jpg
    95.9 KB · Views: 590
  • chris2.jpg
    chris2.jpg
    95.9 KB · Views: 541
Last edited by a moderator:
Status
Not open for further replies.