?? aNo Spark from Plug..Confusedny suggestions?

[Mikest227 03']

hey fellas, my blaster has been out of order for about two weeks now...first i thought i had burned out the rings but that wasnt the problem...got new gasket and fresh oil in it....started up! but when i put all the plastics bak on and tried to start it up again it didnt want to...then realize i wasnt gettin any spark frm the plug... WHAT DO YOU GUYS THINK IT IS??? also i need to get these DAMN TORS OFF TOOO cuz for some reason i think that has something to do with it because when i got it to start up it was idling SUPER HIGH!!

 

[custom2stroke]

you might have a air leak somewhere else in the engine . like crank seals,intake gaskets. or could possibly be an electrical issue somewhere in the wiring harness to do with the tors possibly or the ignition circuit.

 

[stephen12091985]

if it started before you put ur plastics back on check your grounds and check your wire harness to see if there is a bare spot that showing wire

 

[danyoung582]

make sure all your wires are connected you might have knocked one loose putting the plastics back on?..
especially the wires coming off of the motor.
if one of those ant matched up to the right color it wont started,
it happened to me after my rebuild.. lol

 

[97BoredOutBlasta]

ya about the idle, air leak when you put new gasket on maybe? and as far as no spark, check for loose grounds, when i took my plastics off, i missed a green one from the coil, and it wouldnt start, i then re-grounded it then it fired first kick.

 

[Mikest227 03']

yeah ima werk on it 2morrow....thanks for the help!! i'll let you guys want happens 2morrow...