aftermarket head lights

[EXtremeRider]

anyone kno of a good headlight setup?

 

[baggedmazda]

http://www.blasterforum.com/do-yourself-20/wally-lights-install-tons-pics-15515/

i plan on doing this as mine didnt have lights when i bought it big plus there cheap and from the sound of it better than stock

 

[gearhead04]

dido.....^^^^ Whatever you do remember to stay under 55watts total (rear light is 5 watts)

 

[splitd]

http://www.blasterforum.com/do-yourself-20/wally-lights-install-tons-pics-15515/

i plan on doing this as mine didnt have lights when i bought it big plus there cheap and from the sound of it better than stock

Just did this same thing to mine. Simple and easy for around $35. The only problem is the both come on no matter what setting you have the button on. For some reason I couldn't figure out how to make one come on by itself in lo and both come on on high. Either case they still work/look pretty cool.

 

[The Ox]

Thats what I did but I mounted them in a different spot. And I had low be only 1 light and high was both. Works good. I also put a rivet through the lens cover because after 1 ride it popped off and got ran over.

 

[bjsmith]

This is almost exactly what i was looking for, I love these lights. The only problem is I cant find a way to mount them on the handle bars.

 

[The Ox]

why mount them on the bars?

 

[bjsmith]

because i dont like them to look like eyes

i just think they look better

 

[L.T.]

because i dont like them to look like eyes

i just think they look better

do you have a pic of how it looks on the handle bars:?

 

[yb200]

Just did this same thing to mine. Simple and easy for around $35. The only problem is the both come on no matter what setting you have the button on. For some reason I couldn't figure out how to make one come on by itself in lo and both come on on high. Either case they still work/look pretty cool.

run 2 wires from the pos on one light one wire to high beam wire one to low beam wire...take the second light and run the pos to the high beam wire....ground them both....this will give you the one light on low and both on high....I:I

 

[splitd]

run 2 wires from the pos on one light one wire to high beam wire one to low beam wire...take the second light and run the pos to the high beam wire....ground them both....this will give you the one light on low and both on high....I:I

Awesome, thanks for the idea! I'm gonna have to try that out when I get a chance! Rep given for your help

 

[bjsmith]

do you have a pic of how it looks on the handle bars:?

No thats what i am trying to figure out a way to mount them on the bars

 

[baggedmazda]

No thats what i am trying to figure out a way to mount them on the bars

not hard find a piece of flat stock to mount them too then find something that will clamp to the bar wire it up and done