88 blaster

[nascarsteve]

I have been posting on here thismorning about my 88 blaster cant get fuel to the cylinder I have pulled my carb back off and checked float.dont have a caliber but someone told me it should be around 20 to 20.5 mm.I know this is dumb ?but what would that be (measurement wise ) on a tape.1/4 3/4 just dont know.have pulled plug out and it is still dry as can be.reeds are still in good shape also

 

[sicivicdude]

1 inch equals 25.4mm

or 1 mm equals .03937 inches or roughly .040"

 

[scotj77]

you really need a ruler that measures 1/10 inches. easier to figure out things that way. got any drafting rulers around the house. the three sided rulers

 

[Awk08]

c,mon dude, 1 thread would have been enuf to cover all this, we're already helping you in 2 other threads

and BTW...i qouted the float measurement as ....20-21.5 mm's

 

[nascarsteve]

sorry guy's I will figure it out thanks again for all youre help

 

[blasterdemon7]

Maybe this will help you a little . You can use the ruler to mark 20 mm on an object to use to measure your float.
Some printable paper rulers

 

[Paulie B]

Float adjustment is easy no ruler required. Adjust the floats so they are parallel with carb body and just touching the fuel inlet needle.