5/16" reed spacer pic

[tio ale]

can somebody show me a pic of a 5/16" reed spacer for a blaster.......i cant find one........or recemend a size for me....and y

 

[Blasterb0y794]

Are you running a larger carb? The only reason you would need to run a reed spacer is for a larger carb.

 

[yb200]

you dont need a spacer just turn the carb a little to clear the clutch shaft

 

[tio ale]

ill probly get a 28

 

[Blasterb0y794]

Naw, its fine, you wont need one.

 

[tio ale]

oh ok....anybody got one in here a 28mm carb??

 

[Corey]

you dont need a spacer just turn the carb a little to clear the clutch shaft

If you do that it messes with the floats... Trust me, I know from experience... Lol.

 

[tio ale]

so i should just get the 28mm with no reed spacer??

 

[Awk08]

id get the 28mm and see how it lines up and then if theres a clearence problem get a spacer

 

[tio ale]

ok....... thanx guys

 

[pittboss45]

Get a 30mm carb, less money and you will get the better results. You can turn the carb up to a 15 degree angle and still not disturb the floats. You should still adjust the float level on every different carb installed as to where it sits on the engine. And please adjust the carb by the volume of gas it holds.

 

[Blasterb0y794]

I ran a 28mm on my old blaster. No problem what so ever without a reed spacer.

 

[tio ale]

oh ok ill try to get the 30mm carb then

 

[2strokepower]

oh ok ill try to get the 30mm carb then

If you guys are talking about oko 30mm they are great but where you connect the gas line to the carb theres not enough room to put a clamp on the gas line which will make it leak gas. So you have to use zip ties.

 

[tio ale]

so what carb should i use? with a reed spacer.....or with out

 

[yb200]

no reed spacer no no no no no no no

 

[tio ale]

ok ok ok ok ok lol no reed spacer lol

 

[Blasterb0y794]

Use one if you need one, but if you dont, then dont use one

 

[tio ale]

lol ok.....can somebody find me a good carb in here im new to this forum sh*t lol

 

[Blasterb0y794]

30mm carb/throttle cable for Yamaha Blaster:eBay Motors (item 290387667628 end time Jan-10-10 12:10:44 PST)

30MM D slide Carb for Yamaha Blaster:eBay Motors (item 230419383801 end time Jan-07-10 13:25:26 PST)

For starters
Just search on ebay. They're always on there.