03 blaster problems

[nick9882]

i have a 2003 blster,my piston skirt broke,so i replaced the piston and rings and flushed it out as best as i could.......after rebuild and break in,it would strart right up,but only run at high RPMs,then just quit running,did compression check,only 60 pounds,i was told it may be the crank seals and bearings,if anyone has a idea what the problem PLEASE let me know.

 

[randelator]

crank seal or base or head gasket leaking!!!

 

[Paulie B]

crank seal or base or head gasket leaking!!!

+1
My bet is on one of the crank seals.
I've blown a seal on my Blasty and it was scary.

 

[blasterboy91]

bingo

 

[peacher213]

Ya blowing crank seals, sucks.. I took it apart...I blew them both. Go figure.