'00 Help

silentblinder

New Member
May 13, 2009
3
0
0
Hello everyone, here is the problem and hoping someone can help me.
I have a 2000 and it has been bored out .060 over. Right after the bore, everything seem to run right. But it didnt for long. Now, I am having very thick smoke bellowing out of the tail pipe and oil is literally dripping out of the tailpipe. I have adjusted the mixture many, many times and get the same results. I bought a different carb from a member here, and it didn't help at all. It is also fouling out plugs left and right as well...What am I missing? Thanks:-/
 
Well first thing did you rejet for the .060 over? I know mine needed 2 or 3 jet sizes just for .040 over before it ran much better. If you didnt do somewhat of a break in that might be a problem also.
 
Well first thing did you rejet for the .060 over? I know mine needed 2 or 3 jet sizes just for .040 over before it ran much better. If you didnt do somewhat of a break in that might be a problem also.

No, I didn't rejet. And I didnt know about the "proper" break in until I joined this forum..Ill get some new piston rings and jets and try it again I guess
thanks