Recent content by ZeroTolerance

Yea last time i checked. I am going to take a look at it today and clean it up.

http://www.bluetraxx.com/forums/yamaha-yfm660r-raptor-2001-2005/59044-raptor-660-recall.html That is the recall they had.

Yea, i replaced all the seals. and if i ride normal not hard on it it will be fine but once i go over bumps and jumps and hard riding lots of bouncing around then it gets loose then i have to back off and then it will last a little longer before it craps out.

Yea, Each time. I think it is the vibration, or that it eats up the cheap pads and there is low fluid so air gets in the system. Im uprading pads now and going to put some grommets on the mounts and minimize the vibration.

I have a 2003 Yamaha raptor 660, and i rebuilt the master cylinder and rear caliper, but after each hard ride, i need to bleed the rear brakesbecause they loose pressure, I have read about the recall on the raptor660. So i called Yamaha and how I bought the bike used i didnt know if the previous...

Thanks again blaaster i will keep it safe .

Thank you BLaaster . so you would say it ok to keep it as is ??? I dont mind loosing a little power if it mean durability Haha

I have done leak down test no leaks just had to double check, and did the plug chop and came out with the pic above , it running great i think no bogging or hicups in throttle please let me know when you guys think. Blaaster what u think ! Need some inputs.

I did a plug chop didn't take a pic its a little lean i think it is a little gray and has a brown tint to it. Kinda like caramel color with a coat of gray lol. I am about 2 turns out in my air screw. I tried to back the air screw all the way out almost took the thing out and it didnt change...

I love hearing new things and leaning more each day. You are the Technician here haha not I . I only know my bike and thats about all lol if its broked then I should be able to fix it. NOW one thing i dont know anything about is 4 stroke i just got a Suzuki LT250S but dont kow how to work on...

LOL no apologise needed Blaaster i like the help and the details are always great.

Yea post a little description on how you mounted the 400ex front shocks.

Hey Guys, I just got a LT250S and trying to find some plastics engine runs but going to strip it and make a great bike picked it up for 100$ garage sale didnt have plastics thought lol

Yes Sir, I sure did cleaned up and sprayed everything with carb cleaner and cleaned carb spotless and made sure it was all clean before doing it all. And it sound just about right as you listed, and i dont have tors lol that sh*ts junk . I know i was new at the whole rebuilding long ago not...

Oh no i plug chopped and adjusted the idle screw to spec its about 1.5 or 2 turns out if i can remember right , The plug is nice brownish color not white or black.. I just installed the vforce reeds last night, i am going to plug chop again today after work and make sure it is all good and get...