Recent content by zedicus

im in for some front end stuff for a project i got, it is juice style? a-arms spindles and hubs calipers.

i had aluminum rollers on my banshee, never had any issues with them.... i would use 2 of thous together on a shoulder bolt, you want the roller to be a lot wider then the chain, and you want it to you know, roll. a hollow shoulder bolt with a grease zirk in the end of it and some precision...

nah, my wifes current blaster looks VERY similar to this one actually. that does not mean that a RADICALLY different design or way of thinking would not work. just that the COMMON designs are just that, common. and that we have pretty much reached max efficiency in thous designs so...

the charge it takes can be fed into the head design based on the port design. its a matter of making the porting work with the head, that should be in consideration already. ive went over that before, good port timings are useless if the port shape is haggard and malformed.

its no where as drastic as a barrel would be (length for velocity, etc). plus the ultra low compression stock makes it utterly useless in shape. it would not be possible on a stock head but a gun designed with a spark plug instead of a firing pin could be designed. to get velocity behind...

a blank bullet in a gun will take yur hand off if its in front of the barrel, a same sized explosion sitting on an open hand would only cause some minor burning. the charge would be allowed to go any direction like in a normal wide dome, instead of directly directly down at the piston.

i think if it was more drastic and barrel like, like a gun barrel on top of the piston. and the charge could be fired down like firieng a blank bullet, it would be more effective in pushing the piston, we want directional motion out of the explosion.

and that slight swoosh that some people cut into domes on ebay and try and pass them off as 'ultra hp 250% gain just mount this and youll instantly be the fastest thing on the planet' thing really is not comparable, over the tiny shape and huge open end of the dome that pattern does almost...

yeah, even if it did zig zag some it would be auto correcting on it own just because it would have to burn away from the point of ignition. i dont know rather a complete funnel shape, or a straight barrel with a flare at the end would be the best. but a directional forced charge is always...

i always wanted to velocity stack the spark plug. a short barrel would give the wave front of the flame more downward movement. only thing is timing would have to be altered as having a barrel on the flame front would naturally retard it some. plus the chamber shape would need to be almost a...

honestly i wasnt trying to point out correctness or anything. i was trying to be helpfull. my wife continually points out that i get along and have less hostile conversations with machines then people, so i am sorry for coming off sounding like a DB. and i am really good at finding things that...

they are all honda clone motors. the dang polaris 50 uses the same motor. i had a carb get dirty and gummed up and i got a CRF50 carb to go on the chinese atv because it was 12$ and the rebuild kit was 11$. look, dont look for hyotibigatchi parts, or whataver brand is on the plastics. look for...

what country do you live in? i dunno about you but here in amarichina all we can get is chinese knock off parts. ive got 2 of the china atv's for my kids, dead simple to work on, parts are DIRT cheap. and even shipping from china they get here in a week.

port timing is about 50% of a good port job. a hacked up port shape with great port timings wont do near as good as a stock timed jug with re-chambered and shaped ports.

you would be amazed at how far off it can be and still run o.k. especially in a fairly stock blaster motor. its not a nitro drag engine measured to ten-thousandths.