Recent content by rodder_069

Well, its been awhile since the last up date. I borrowed a flywheel from the local shop to try just for sh*ts and giggles. Well bolted it on without touching stator coil locations and was making close to 30 volts(dont remember exactly) ant making great spark. good news. only problem is it would...

thanks for the help. I was trying to check with a test light but no luck. I hooked up my multi-meter to see if the stator was responding to the flywheel rotation. It showed between 7 and 9 volts, so i checked at the ignition coil and it was also receiving the same voltages, i tried checking the...

Put new coils on stator, new ignition coil, and still no spark. Has anybody heard of how to set the air gap on the stator coils?

Well i checked the black to black/white continuity and there was none, just as it should be. So i rechecked everything. All checked good again so i decided to take a look at stator just for fun. Well when i got the flywheel off i checked all my resistances again at the coil terminals. The pickup...

Yea I've tried all combinations with the TORS wires from all unhooked one jumped, and the others unhooked all jumped, still no difference. Good idea on checking the black and black/white for continuity, i checked all wires in the harness separately but didn't think to check for crossing over...

It's an 03 it's built into the cdi and already tried bypassing it

yes i have tried unhooking both the kill switch and the key

I have an 03 blaster not getting spark. We bought it not running. I checked the stator (source coil 233 ohms pickup 21 ohms) Tried cdi box on another quad worked fine. I've checked continuity of every single wire, switch, and connection. The TORS is bypassed(tried every combination). All grounds...