RIDE-RED350r's latest activity
-
RIDE-RED350r replied to the thread Reed bolt snapped.Did it leave any protruding you can get a hold of with a pair of small vice grips or is it flush/recessed? If there is a bit sticking... -
there's play at the arm in the case. I did find that I had installed the wave spring incorrectly. Fixed that and it operates like it...
-
RIDE-RED350r replied to the thread Clutch always partially engaged..How is your clutch cable adjustment?
-
RIDE-RED350r replied to the thread Axle and hub coating.Absolutely, otherwise you will need to keep it touched up by re-sanding periodically.
-
Thank you, I’m guessing they need a coating of some type to prevent rust
-
RIDE-RED350r replied to the thread Axle and hub coating.Ah gotcha. Most axles for most all machines I can recall from back in those days had a sort of zinc coated look to them like the hardware
-
Thanks, I’ve heard of people sanding their axles, just didn’t know what the factory coating was or if it was just left bear metal once...
-
RIDE-RED350r replied to the thread Wiring harness, cdi.Here is where you can download the service manuals...
-
RIDE-RED350r replied to the thread Wiring harness, cdi.The kill switch and key switch kills ignition by grounding it. There is a downloadable service manual on this site which will have the...
-
RIDE-RED350r replied to the thread Axle and hub coating.I've seen good results progressive sanding axles followed by clear coat to preserve the finish. The hubs, I might get PCed or get a new...
-
They are a wonderful fun little quad, I think a lot of people overlook them in favour of the Banshee, without ever riding one. They are...
-
RIDE-RED350r replied to the thread OG members?.I've only been on this forum a short time since getting an older Blaster for my daughter last fall and going through it. But I've been...
-
So are there any of the old members still on here? Like those from when this forum was really hitting its stride? It’s been a long while...
-
RIDE-RED350r replied to the thread Another reverse blaster.This is very puzzling to me and not the first time I've heard of it. About the only thing I can think of if the flywheel key is sheared...
-
RIDE-RED350r reacted to Rubbersalt's post in the thread Building an Adjustable/Tune able CDI with
Like.
I've refined it further. I havn't checked Peak RPM on the new refinement. I'll be refining them further too :) The other model was...