Recent content by motox13ds

My son will be 15 this August. He does not have a lot experience on trails or things of that sort, but he has been riding fields for a couple years now when he gets a chance to find a loner wheeler. He has even rode a 450r (not allowed to open it up, lol) and knows how to handle the power. It...

Here is a pic of the cylinder... If I bore .020" over, do I need to re-jet the carb too? Any suggestions for a reed valve? Im leaning towards either the Boyesen Super Stock Fiber or Super Stock Carbon? Thanks.

This piston has some scaring on the side that faces the front of the wheeler. It is worse than the cylinder walls, which I have to assume is normal. From what everyone is telling me, I am assuming the top end blew simply because it was never maintained and most likely still had original piston...

Ok, been a while but I finally had time to check it. Thanks for all the help guys. So I did compression test, only 35psi...obviously my problem. I took the head off it and the piston & rings I am fairly confident are original. The cylinder wall has some scoring and everybody who has looked...

I think I need to get a compression tester and check that. At least that way I can determine if its the top end or a fuel problem in the carb or reeds. When I took carb apart, I did remove the main jet and spray carb cleaner through all the ports. However I did not remove pilot jet or the...

I bought a used 05 Blaster for my son recently, he rode it good for 2 weekends then it died. It first stalled when he was slowing down and would not start again. So we cleaned the plug, which it definitely needed replaced. Still it wouldnt fire. So we tried bump starting it and it fired. He rode...