Recent content by jbblaster7

Well I don't no how to do it

I just thought with this being the biggest forum for blasters I would get a lot more replys. Maybe everyone was just as confused as I was o well thanks for the help guys.

I didn't mean to complain and I had to get the tool back to pull off the fly wheel before I put the old one back on I didn't want to mess up the fly wheel. Also I do t no how to do a leak down test

Update I finally got it fixed and yes float at 21.5 mm check with digital tool. My problem was that brand new adjustable stator, took it off put old one on and runs like champ now I can brake in the nee piston and rings. I must say I was a little disapointed in the lack of info I got from users...

I have yet still no luck tore it all back apart again today if any insightful people could call me and answer some questions I would apericate it 614 843 3384

Mix screw is at 1.5 turns ill check fuel bowl tonight

Mix screw is at 1.5 turns ill check fuel bowl tonight

I removed switch at thumb throttle yes checked the clip on needle everything seems ok

If I just in hook the green wire and leave it lay it loses all spark

Also I need a ground from coil to frame right what's with the xyra green wire if it's connected to one of the bolts on the stator could it cause this issue

Yeah its a 5 wire stator green is running to coil end that bolts to fram

Measure what the gas that's in the bowl when I drop the bowl it's almost full

Also my float level seems to be fine bowl full of gas not overflowing seems to fuel fine

I'm really wondering if my coil is wired wrong, and why my plug gets so black checked reeds there fine I have not done a leak down test just a compression test

Piston I don't remember this has been like this for a month I'm sure it is and I dont have a parking brake wish it was that simple lol