Recent content by HunterDan

aNY Idea of what it could be?

hey guys, i finished rebuilding my blaster, and my carb, and today it started right up, but when i hit the throttle, it studdered, and after a minute or so it died and backfired. Any thoughts on what it could be? Could it be the jetting?

Cobra! i know...pretty sick

i deer hunt all fall, like atleast 3-4 days each week and the weekends. this is my fall 08 buck. used my bow, a hoyt vectric which prolly cost more than my quad. lol dorchester county, MD on Nov. 8th. Dressed at 142 lbs, and had a 15" spread i was featured story on the front page of...

ill post some pics of it tommarow, it is kinda black lookin on the bottom

how could i unclog that valve? or could i just buy a new one?

yes and it still didnt work??

i pulled the float off, and that little valve thats under it, and sprayed the fuel intake with carb cleaner, and it came out down the bottom were the float bowl would be. i put it all back together, and it doesnt work. could that valve type thing be clogged or what?

ok i think ive got the problem figured out. there is a clog in the fuel inlet on the carb. i sprayed carb cleaner directly into it, and it just splashed back out at me. i tried a tooth pick, but that didnt work...what else can i do?

i believe you have found my problem! Now how can i get the clog out? i sprayed carb cleaner in it, and nothing came out. so i stuck a tooth pik in and it felt like it was pushing something so i stopped pushing so i didnt cause more harm. How can i get it out??

the float bowl had no gas in it, it was just sort of wet, and smelled of gas. The air filter could be the key, i bought a brand new stock one, and oiled it up pretty dang good. it said on the oil to spray it til oil is visible on all surfaces, and i know i oiled the heck out of it, so that...

Blaster wont run after rebuild?! - Yamaha Blaster Forum that was the original thread. Ok, so we checked, and i do indeed have spark...so thats good. ive tried starting it many times, and this is all i get MOV01868.flv video by HunterDanM - Photobucket it was then suggested that im...

how can i do that? and how can i see if it is working or not?

http://www.rydindirty.com/blastermanual.pdf pg. 5-14, is an "exploded diagram of the carb/reeds and all. hope this helps!

is it safe to pour gas down the plug hole and howdo i go about doing it?? its still a no go, and my clutch isnt working now, so i cant push start it. The plug was dry, but it had been sitting for a day or so. when i took it out and did the trick to glear the fuel out, no gas came out of the...