Recent content by broom master 61

  1. broom master 61

    yamaha blaster clutch help

    I need help adjusting my clutch so it goes through the gears and will idle. I hadto replace the inner hub of the basket and bout a couple new screws for it. How far down titened should they be and how far should the clutch lever that the cable how far should that move forward. I dont k ow...
  2. broom master 61

    flywheel Grinding?

    If there is a little of the magnets broke off would it still be good.
  3. broom master 61

    what does the flywheel even do

    What does the flywheel do on tgebike and do u even need it. And does anyone have a good used flywheel for under $50 or so. Near binghamton ny. Or can sell on ebay.
  4. broom master 61

    flywheel Grinding?

    Its notthepistonor crank i took thecylinderoff and checked piston and its fine.i think itmight be themagnet in the flywheel cause i got a paiceof magnet stuck to a screw drinver. Im takingitdownto get the flywheel pulled off.
  5. broom master 61

    what rear atv rims will fit a 96 blaster

    I am wondering what rear rims fit a 96 blaster bolt pattermand will be alot smaller thatthestock wheels and rims.
  6. broom master 61

    flywheel Grinding?

    Help i haventgotten the hance to removemy flywheelyetbutit grinds and is hard to kick over and my flywheel gets stuckandi have to get a socket and turn it back wards. Any help. It made my bike shut off when it got stuck at dead stop.
  7. broom master 61

    start a blaster without the expansion chamber

    All i do is wanna start it for a couple seconds. I havent heard it run before.
  8. broom master 61

    start a blaster without the expansion chamber

    So would it be fine if i started it
  9. broom master 61

    start a blaster without the expansion chamber

    What would go wrong or nad if i started my blaster without the header/expansion chamber. I got ablaster and havemt started it sense ive gottin it. Any help...
  10. broom master 61

    blaster exhaust

    Is there anyone near binghamton new york that has a blaster silincer and or header or both they would trade for a stocck swing arm and maybe also the heel guards.
  11. broom master 61

    engine will not turn over

    I checked it its fine
  12. broom master 61

    engine will not turn over

    I didnt try the stator thing but there is no spark plug when i turned it over and idk how it would get fille woth rain.
  13. broom master 61

    engine will not turn over

    Okay i got it with the motor out and no header. It was turning over fine. It had compression. But recently ive ben leaving the bike uncoverd. And nothing stuffed in exhaust port. I was kicking the bike over the day before and it kicked over fine. But the next day i was kicking it over it was...
  14. broom master 61

    engine will not turn over

    Its not stuck down tho.
  15. broom master 61

    engine will not turn over

    No thete was nothing and i said i left it out for a couple days un covered. And not sprin just got new peices for it.