Recent content by BrianB

  1. B

    Is there supposed to be a gap?

    Ok so we have stripped it down and cleaned it, we had to send it in and get someone to use a press to get it loose. Do I apply the anti seize to the splines? Is it still necessary to use grease on top of the anti seize or is the anti seize sufficient. Edit: Would the Wheel Bearing Grease...
  2. B

    Is there supposed to be a gap?

    The problem is he stripped one of the wheel nuts and that is why he doesn't want to dismantle anything else. If we can safely ride the bike, he will send it in after the weekend. Is it safe to ride?
  3. B

    Is there supposed to be a gap?

    This bike is not mine but we going away this weekend and wanted to take it with. We tried tapping it into place but it wont move, how hard can we hit it, what could be preventing it from moving into place? The person who owns the bike doesn't seem to happy with dismantling it even though it...
  4. B

    Is there supposed to be a gap?

    We actually tried that but it didn't move, we where not sure so we didn't hit it to hard. Will give it another try tomorrow. Thanks for the help.
  5. B

    Is there supposed to be a gap?

    That's what we thought but how do we tighten it up?
  6. B

    Is there supposed to be a gap?

    Is the gap just to the right of the brake disk supposed to be there? We noticed the nut on the other side was loose and now we not sure if this gap was there before.