Recent content by brian1226

none of u answered my question..

is it the thing wit the metal clip attached? if so, its in the first groove.. can this be why my quad is reving really high whenver its in neutral or when the clutch is pulled? thanks

i finally got my quad running good untill i decided to clean the carb.. after that, the thing stated running how it used to ( it revs up whenever its in nuetral or when the clutch is pulled and needs the choke to start back up) so the carb is adjusted at 1.5 turns out on the air screw and i...

ok i put in the new brake pads but dont know how it all fits together haha. how do i create slack in the brake cable so i can hook it back up

alrighty thanks a lot guys, i'ma do everything u say by tonight so i'll let u know if it works out. the only thing i dont understand is how to "up the main jet" it might not even be the problem but i'd like to try it out if everything else fails. thanks

ok i'ma try that tomorw, i basically have the same set up as you ^^ with the pipe and air filter, i dont know if that will affect how much i should turn the air screw? but if thats how u have ur quad then it should work out for me too

my quad starts up good and i understand it revs up to warm itself up when the chokes on and when i turn the choke off it runs good but whenever i hold the clutch in or put it in nuetral, 10 seconds later it starts to idle or rev high and when i slowly release the clutch it idles back to normal i...

please help ?

ok thanks.. how do i take apart the pump so i can take out the plastic gear.. i removed the four screws but it wont come apart.. also, how do i remove the thing sticking out of the engine that the gear used to turn just incase i want to buy the block off kit one day.. thanks

can anyone explain or show a picture of where the OIL INJECTION CAME INTO THE CARB because i bought the quad without knowing if they took that tube out or not.

whats the easiest way to do this and where is the pump