Recent content by BRIAN ADWELL

I just bought the same right bend pipe as pic. for $50 and it was in perfect shape.The motor I put it on is stock w/.040 piston.Much better than stock but it needs more umph! What would really wake it up?

I bolted these shocks right up only thing I need to do is get some washers for spacing on upper mount.The lower mount fit perfect.I even used the factory shock mount bolt cause it fit through the Fox spacer perfectly.They are pretty soft because when I hopped on it it pushed the a-arms parallel...

K,thanks i'll try them today.

I am building a blaster w/an 85cc engine for my 9yr.old and was wondering if these Fox Podium front shocks would work on it.They are 14" eye-eye and they came off of a cobra ecx 70.I thought they might cause the length is the same and it would soften the ride since they were for a cobra?Any...

What are some proven good power 2-stroke motors that you all have built?Remember it can be anything that is placed in a chassis from factory under 110cc.The largest I can think of is the KTM 105 or the KX100 but you don't see many of them.The final cc displacement can then exceed the 110cc with...

I asked my 9yr old what class he wanted to race in this season and he said he wanted to stay in the same class he raced in last year.Last year he and his brother cleaned house with their suzuki LT80's!All year he complained about being cramped up on the little LT so I had traded for our first...

Does anyone know what it normally costs to have an aggressive port job done on a blaster?I think it would be best to have the power to come in low to mid-range rpms because there are several tight turns and not many long straights to rev out on.I have even thought about just replacing the 200cc...

Thanks AWK08 I will grab a set and try those.AWK08 I see that you have had KOR do some work for you and can you suggest what type of porting would be best for what we do and who I should have do it?Trail port,MX port,etc.

I think the caster/camber would stay the same cause when I tried pushing down on front it looked to be ok.Its different on my youngest sons LT80 cause it has single a-arms.I may be wrong has anyone tried this before?I would like to find a used diamond J set-up cheap if anyone has one? Thanks

Thanks guys I'll try the raptor 350 fronts and I know where a banshee rear shock is so i'll see how that goes also.I just need to get it as low and wide as possible.I would just buy aftermarket stuff but I'm on a tight budget due to just changing jobs and having 2 kids and a wife that can't work...

I would rather try a shorter shock because I have several friends that part-out quads all the time and they have lots of different shocks but I dont know what to ask for to lower the height.I could get the shocks cheaper than the lowering links I would think.

I have an aftermarket +5 but I don't know for sure what brand. Snyder maybe? I'm looking for a set myself!

Is there a shock that I can use in the front and back to lower the ride height of their blaster?300ex shocks?Or any others?

I have one of Jacks stage2 kits but its on the shelf at the moment.We have tried a (cgr) Chris Grissom motor the last 2 rodeos of the year and its a quite a bit more powerful and revs to the moon! Its a national ported, big bore 54mm, stroker, and PVL ignition, and trinity pipe.I was happy with...

To be real honest my 6yr old puts down quicker times than most in the 400cc class it is very quick for what it is lots of mouths drop at the rodeos its quite a thrill just to watch!My 9yr old is about 50lbs heavier and it shows when he's on the 80 so thats why I got this blaster.I have been...