Recent content by Boombiladi

Ok. It sounds like I'm going to have to have it read at a shop. The background of the blow up is as follows, the cylinder looks fine. The rings were still fine where it went was it got a hole through the center of the top of the piston. I was hoping to not have to take the hole damn thing apart...

Ok, so my fiancées blasters top end went last weekend after a long ride and we took the top end off and found a hole in the middle of the piston lol all else looks good minus some debris. My issue is I'm not sure of the bore and I'm pretty sure it's not stock. I found numbers on the top of the...

Ok cool, I'll get a fuel filter, but I know the tubes are clean. I had already cleaned the tank and pulled the petcock just to be sure, but thanks for the tip.

Ok!!! Awesome, you guys are awesome. As for fuel in the bottom end I don't think there is any but I'll follow your tips to be sure. I'm in the middle of moving so I won't get to work on it tonight, but I'll start with the carb. That seems most logical, and also flip the petals and throw a new...

Yea I had good spark.... I'll flip the pedals before I buy new ones. See if that works...

Ok... I will get a leak down tester just to be safe... As for the plug it has never ben ran just tried to start with it in after I bought it. But I'll get a new one And I tried adjusting the air screw but I can't really get a good adjustment until I get her running. but 1.5 turns out is where I...

Ok cool, I'll pick up new reeds. And as for setting the float I don't know how to do that... I'll do research to find out. Thanks guys.

Hey guys, I know I'm a pain but I'm confused. For those who don't know, I got a basket case and pieced together a quad. After a lot of time, work, and money I can't get it to start. I need some help or tips. So here it goes, I got good compression and spark. I replaced all the seals in the...

Ok cool thanks for the tips.... I did find the half moon cotter key was broke that holds the flywheel on the crank so I'm getting s new one of those, and I got a new gasket and seal kit coming via wiseco so I'm going to put that all on and do a leak down test and I'll let you all know my...

Larry's shee....I'm not sure about the spark.... My buddy was looking at the spark while I kicked so I'll have to look at that myself.... And the leak down test=I never even heared of that before lol another reason I'm glad I found this place. I'm going to try and post my progress up from when I...

Awesome! Thanks for posting my pic and all the help fellas.... Glad I joined this forum. Y'all are a lot of help, and aren't dicks about it like other forums I've come across lol

Ok... Once again thanks for the help.... Sorry, I'm still kinda new here

Awesome.... I'm watching now. I was just reading about the pilot screw.... Seems very technical and I never thought it was that important. Thanks for the tips guys

Ok. Thanks, but I'm unsure what you mean by leak down tested

Ok, thanks for the tip... I'm not sure wich one on the carb that it was. Yes it does have the tors just isn't hooked up and there isn't anywhere to hook it up that I see. I did put a new base gasket on just not the copper one. And as for pictures, I've got a bunch that I want to put up to show...