Recent content by benno200

I am looking for an early blaster part, its for the rear caliper which is cable operated. I am either looking for a knackered rear caliper which is still complete, or.... Inside the caliper when you take the mechanism out there is a deep washer which has 3 internal slots which locate to...

I am looking for an early blaster part, its for the rear caliper which is cable operated. I am either looking for a knackered rear caliper which is still complete, or.... Inside the caliper when you take the mechanism out there is a deep washer which has 3 internal slots which locate to...

can anyone help me,i have a 2001 blaster and want some rear spacers for it,iam in the uk and flea bay doesent have any at all,has anyone a set or have any contacts. also i have a set of stock rear tyres if anyones intreseted?:)

Does anybody know where i can get hold of a set of wheel spacers around 2" in uk preferably if not USA.

i notice all you guys have different flatter/smaller tyres compared to my stock ones (DUNLOP-CHENG SHIN) SIZE IS 21X10-8 what do i do? just change the tyres easy as that? what size would i go for ?

yes your right,just checked, the PCD is different cheers guys

Does anyone know if the YFZ 450 wheels will fit on the blaster?

REAR TYRE CHANGE THNINKING OF CHANGING MY STOCK REAR BLASTER TYRES FOR SOME BETTER ONES,TURF TAMERS OR SIMILAR IT IS TRUE I WOULS HAVE TO CHANGE THE REAR SPROCKET IF I CHANGE THE FROM THE STANDARD FACTORY/STOCK TYRES

THNINKING OF CHANGING MY STOCK REAR BLASTER TYRES FOR SOME BETTER ONES,TURF TAMERS OR SIMILAR IT IS TRUE I WOULS HAVE TO CHANGE THE REAR SPROCKET IF I CHANGE THE FROM THE STANDARD FACTORY/STOCK TYRES

TOOK QUAD OUT ,REMOVED AIR BOX LIDD,TURNED AIR SRCEW AND BOUGHT ANOTHER PLUG... RUNNING GREAT.. THANKS FOR YOUR HELP GUYS NEXT STEP TO FIND A PIPE FOR IT

Duh!!! Prpblem was caused by- flat rear tyre,pulled the front shock right down cheers

ok cheers mate gonna try it tomorrow (sunday) with another new plug and the air-box lidd off the only thing i can adjust form what i can see is the air-mixture screw so ive done the 1 and a half turns out

yes had it apart cleaned jet and drained the pipe etc

texaco unleaded 95 oil is castrol as i remember

just a quick qeustion I have a 2002 blaster which mixes the oil automatically,but my plug is black and wet, i have replaced it ,and within 30min it goes again and runs rough,i have the right plug and have turned the air-mixture 1 and a half turns out... does anyone have ideas plz?