Awk08

Awk08

Staff member Technician
Administrator From Usa
Messages
24,427
Media
103
Reaction score
2,294
Points
175
Joined

Profile posts Postings Media Albums About

  • Tooloose
    Awk can you give a part number for the hubs that are 4 on 115 bolt pattern and will fit the stock blaster spline ?
    Tooloose
    Especially what year are the 4x155 mm hubs for banshee’s? I’ve been told some years are 4x156. Thanks Tooloose
    Tooloose
    Ask what hubs do I need to buy so I can the 9 inch banshee rims and tires on my blaster?
    Enzo
    Hey are you still selling those leak down testers? I put in a new sudco carb and I’m still having high idle issues. Idle is all over the place.
    Awk08
    Awk08
    I do not bud, sales fell off and wasn't worth me ordering and sitting on a bunch of parts
    • Like
    Reactions: Enzo
    T
    Hey awk08... whats your opinion on the diamond j widening kit trail riding
    Awk08
    Awk08
    I've not heard of any breaking ever, but do kinda remember something about alot of bumpsteer, I think that's the tires cocking on their own over heavy terrain or landing jumps. the geometry just isn't right. I'd go with a wider budget a-arm over that kit anyday
    Cam defran
    Hey awk I'm converting to rear hydros and I see your the man for fabrication advice...I want to save the stock heel gaurds if I can do you know of any way to mount the master cyl without having to ixnay the gaurds? Any advice will be much appreciated
    Tooloose
    Hey Awk! I'm getting ready to put a new piston( Wisco pro lite stock) replacement ( stock )66 mil. Is the compression ratio higher with this prolite piston? The the current piston is a China replacement Stock piston kit. It has relief on the piston top, facing the exhaust port.
    Awk08
    Awk08
    I don't believe there are any pistons that advertise increased compression, we have learned raising compression without adjusting the squish band and combustion chamber of the head is a risk for detonation and frying the piston. if you're looking for more compression, the Ken Oconnor Racing head mod is the way to go. .... http://kenoconnorracing.com/ns/pricing
    chevymuddman
    Mr. Moderator I haven't seen you in forever. My God has it been to long
    • Like
    Reactions: Awk08
    Awk08
    Awk08
    Whats up buddy, you're right, way too long. get your ass to our summer ride at Mountain ridge this year ?
    chevymuddman
    chevymuddman
    That's cool that your having it there . It's been 2yrs since I rode anything but getting the itch.
    Awk08
    Awk08
    keep in touch, bring the golf cart if you have too :) probably mid/late july.
    Tooloose
    Hey awk, where can I get 2 9" rear steel rims that aren't bent for the blaster. Seems to be easier to get 9" tire than 8s especially when you buy all 4 sets
    Awk08
    Awk08
    I'm not sure I've ever seen steel rims in 9" ? Maybe on Rocky Mt. ATV ? I can tell you from experience the stock 9" Banshee/YFZ/Raptor aluminum rims with the rolled lip are stronger than the steel blaster rims.
    Awk08
    Awk08
    9" definitely has a broader tire selection, and is why alot of us run the 9" Yamaha aluminum rims, you'll need the axle hubs too, they are a 4x115 bolt pattern, stock blaster hubs and rims are 4x100
    400ex killer
    What will I need for my air striker ..#6 slide a new throttle cable and adjuster but I have to change the needle too? I see you wrote that for a 33mm but i didn't see anything for a 35 mm airstriker
    400ex killer
    Where can I get a bigger boot for vforce 4s to fit 35 mm carb . And can I sell my rad valve on the form ? If you could help that be great new to the form
    Tankbuster
    Hey AWK, I was cruising the forum about kick start rebuild kits last night , word has it you may have some kits available?? is this true? Please let me know, mine is on the way out.
    View previous comments…
    Tankbuster
    Tankbuster
    cool.... I will be ok with the kicker. Thanks for the response!
    Awk08
    Awk08
    just remembered, I think someone on ebay sales a spring/ball rebuild kit for banshees, it includes some extra part we don't need, but i've heard the spring and ball will work for our kickers ?
    Tankbuster
    Tankbuster
    Well, after removing the kicker, I noticed the shaft is grooved and the return spring is extremely weak. Looks like I will have to replace or rebuild the whole kicker internals. I was thinking of a total rebuild or replacement. I don't have a lot of cash to do the job right now. I'll deal with it for now.
    -TANK-
    FasterZAblaster
    if i put let say a Koso 30 mm flatslide powerjet in my bike, do i use that needle or how does it work? please give some advice?
    View previous comments…
    Awk08
    Awk08
    the main jet has zero effect on how smooth the idle, low end or mids are, they are handled by the pilot/airscrew and needle. main jet only effects above 3/4 throttle.
    Awk08
    Awk08
    if you're trying to smooth out a stumble or bog with a power jet ? you need to tune those circuits where the bog is, not mask it with a power jet.
    Awk08
    Awk08
    maybe we're all missing the secret benefits of a power jet that you know of and we don't ? or is what you posted above copied and pasted from an ad trying to sale you something you don't really need ? because it sure sounds like it. :)
    mrmeoff
    I was looking for some ideas and help with a 2000 blaster and what parts and yrs I can use for upgrades on the front brakes I'm looking for the whole set up for the rear there is none now and need rear axle I think this may take me a while looking for everything and finding parts in good shape and price
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top Bottom
Back