new motor setup jetting?

[JWjite]

I just built a motor with a +3 vitos crank stock bore. I have a riva racing pipe and silencer. I am running 28mm keihin pwk d slide with vforce reeds the ones with two reeds not the threes. I also have the f7 air box with a white brothers air filter and the outerwears cover. I don't know were to start my jetting please help.

 

[JWjite]

I realy need some ones help with this doesnt anyone have any idea what the jetting should be on this?

 

[Awk08]

heres what a "28mm carb jetting" search on here turned up for me.....................

http://www.blasterforum.com/engine-13/pwk-28mm-carb-baseline-15441/

http://www.blasterforum.com/engine-13/jetting-28mm-pwk-w-toomey-b1-1538/

http://www.blasterforum.com/engine-13/oko-28mm-carb-qustions-26635/

 

[slickerthanyou]

I would say start with a 52 pilot, and 170 main needle in the middle-prolly on the rich side.

 

[JWjite]

I finaly got it running today now I just need to tune it and all should be fine. I ordered a few jets from jetsrus.com so maybe later this weak I will get it finished.

 

[JWjite]

OK so 170 main is to much I am still waiting on my order to show up but atleast I know for sure its not a 170 main. I ordered a couple different sizes of mains and slow jets so hopefully one of them will work.